|
LT450R |
||
|
What you get with our A Arm kit:
New upper and lower a arms, new tie rods, new ball joints, and all the bushing hardware needed to install the a arm kit.
|
This A Arm kit was designed for XC racing. It will give you a
front end width of 46.5 inches at ride height when used with the
popular 4/1 offset Hiper front wheels. It has the lower shock mount
relocated to achieve the up travel and down travel of the front
wheels that is desired for peek performance in XC racing. The
lower tubes are manufactured from 4130 .120 wall tubing for maximum
strength. These a arms are specifically designed around the stock
front shocks.
|
|
